JB's Wear Hi Vis Day/Night Safety Vest — Custom Logo

Certified day and night hi vis vest, printed with your logo — our cheapest way to put a business name on a whole site.

Base price includes a free chest logo — put it on the left or right chest, or move it to a full back print for $5.99. JB’s Wear 6DNSV Hi Vis (D+N) Safety Vest — light 100% polyester tricot with a front flap that closes on hook-and-loop tape, contrast grey binding and retroreflective tape over both shoulders and around the body. It pulls straight on over whatever the crew is already wearing, and it is rated for night work as well as day. Prefer a zip? See the zip version.

Pricing

• From $17.99 — vest + free chest print
• 4XL and 5XL $20.99 · 6/7XL $23.99
• Want the included print on the full back instead of the chest? +$5.99
• Extra locations: chest +$6.99 · full back +$9.99
• No minimum order and no setup fee. Print-ready artwork — a transparent PNG or a vector file — carries no artwork fee either

Print positions on a day/night vest

• We never press over the reflective tape. Heat flattens the glass beads inside it, and covering reflective area is what costs a vest its night rating. Every print below sits on the fluoro fabric, clear of the tape
• Two tape braces run over the shoulders and down the front, so the printable chest panel is the strip between the brace and the front flap — a small logo, roughly 9 × 6 cm. A crest, a name or a short word rather than a wide logo
• The back is the big one. One clean fluoro panel above the waist tape, up to about 28 × 20 cm — the right place for a business name, “VISITOR” or a full club logo
• Want lettering on both chest panels as well as the back? Add the second chest as an extra location and we do all three

Team pricing

Applied automatically at checkout — mix garments, colours and sizes across our custom apparel range, they all count toward the same total.

• 15+ garments — 5% off
• 30+ garments — 10% off
• 60+ garments — 15% off
• 100+ garments — 20% off

How to order

1. Pick colour and size, choose where your included print goes, then add any extra locations — upload artwork for each
2. No file ready? Order now and email it to hello@dtfmotion.com.au with your order number
3. We send a free mockup for approval before printing

Turnaround

• Mockup emailed within 1 business day of your order (or of receiving your artwork)
• Printed and dispatched 3–6 business days after you approve the mockup
• Delivery after dispatch: 2–5 business days Australia-wide, tracked (Australia Post)
• Shipping: $20 flat — free on apparel orders over $180
• Job locked in for a date? Email us before ordering and we’ll tell you honestly if we can make it

Garment & specs

• Style code: JB’s Wear 6DNSV (SKU format 6DNSV-COLOUR-SIZE)
• 100% polyester tricot — light, quick drying and hard wearing
• Classic fit, front flap with hook-and-loop closure, contrast grey binding
• Day and night rated. Complies with AS/NZS 1906.4:2023 and AS/NZS 4602.1:2011 Day & Night, and with AS 4602.1:2024 Day & Night (Level 1)
• Retroreflective tape over both shoulders and in two hoops around the body
• 3 colours: HV Pink, Lime and Orange. Sizes 2XS–5XL in all three; 6/7XL in Lime and Orange only
• Worn over other clothing, so it is cut generously — check the size guide before you order a run

Print & care

We print with DTF (direct-to-film) — full colour, no colour limit, no setup fee, and it bonds to 100% polyester that DTG cannot handle. Our transfers are tested to 50+ washes with no cracking or fading.

• Wash inside out, cold or warm (max 40°C), gentle cycle
• No bleach, and no fabric softener on the print or the tape
• Hang dry — tricot dries fast, and dryer heat is hard on reflective tape
• Never iron over the print or over the reflective tape
• Leave 24 hours before the first wash
• Reflective tape wears out before the garment does. Check it still comes up bright under a torch, and retire the vest when it dulls

Artwork

• Best files: PNG with a transparent background, or vector — AI, EPS, PDF or SVG. These print exactly as supplied
• JPGs, screenshots and photos of a logo are still accepted. If the background has to be cut out an artwork fee may apply — we always quote before we start and you can approve or decline
• Text only — a business name, a role like “MARSHAL”, or numbers? Type it into the notes on this page and we set it for free
• 300 DPI at the final print size
• Minimum line thickness 0.5 mm so fine detail holds
• White in your artwork prints as white ink — if you want the garment colour to show through, make it transparent
• Up to 20 MB per file through the uploader; larger files, just email them

Size guide

All measurements in centimetres. Chest is a half-chest measurement — taken across the garment laid flat, not around your body. Length is measured from the shoulder point. This vest is designed to be worn over a shirt or jumper, so it is cut wider than a polo of the same size.

How to measure: lay the jacket or jumper you want it to fit over flat, measure straight across from side seam to side seam, and add a few centimetres. Because it pulls on over the top and closes on a flap, the fit is forgiving — most crews order S/M/L/XL only and it works.

Sizing and returns: printed garments are made to order, so we cannot accept change-of-mind returns or size swaps. We will replace or refund anything with a print or garment fault. Kitting out a whole crew? Email hello@dtfmotion.com.au — we can help you work out a size run before you commit.